Multi-stage Centrifugal Blower Advantage:
• Designed for optimum performance at 50 Hz drive speeds
• Direct coupled motor
• More than 8% higher efficiency
• Higher pressure capability
• Quiet: no gear box needed
• Small footprint
•Bearing life of 10 years or more
• Constructed of cast iron with a carbon steel shaft and aluminum impellers
Main technical specifications of C series products:
Inlet flow rate: 15-1500m³/min
Outlet pressure: 1000-12000mmH2O
Environmental temperature: -35~+40ºC
Relative humidity: 20~85%
Noise: ≤84dB(A)
Bearing seat vibration value: vibration speed ≤4.0mm/s
Multi-stage Centrifugal Blower Applications:
Designed to handle air or gas, our blowers are used in the following applications
Water treatment
Waste water treatment
Combustion air
Central vacuum cleaning
Fluidization and homogenization of silos
Liquids or baths aeration and agitation
Air knife drying
Galvanizing process
Gas compression for chemical and petrochemical industries
Pulp and paper, printing industries
Multi-stage Centrifugal Blower Specification:
The above specifications are only for reference and subject to change without prior notice, please confirm with our sales representative when making order.